HONGYANG GROUP Ecuador Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Ecuador Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

P-GA FUEL DISPENSER

P-GA

P-GA FUEL DISPENSER

Pump Type: Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type: Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price :0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price :0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight : 280kg

Dimension(L×W×H): 1060*550*1620(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 44 20ft: 22

products links

links

technical archives

    ping a little oil flow out of corrugated pipe, put a container under it. The method is suggested to be applicable to other maintenance of hydraulic components. Article VI Solenoid valve In this Article a switch, controlled by electric components, is installed at inlet or outlet of measurement transducer, which is used for ensure the accuracy of presetting filling volume of fuel dispenser. Nozzle cannot be closed after finishing presetting volume due to the inertia of pump and pressured oil, which results in that real volume exceed presetting volume so as to affect fuel dispenser’s accuracy. In order to prevent this phenomenon occurring, most of manufacturers of fuel dispenser adopt to mount a solenoid valve at inlet or outlet of measurement transducer, switching off valve prior to presetting volume getting reach through regulating appropriate ahead volume. The method is one of the most efficient measures that used for ensuring fuel dispenser’s accuracy and preventing overrun resulted from the inertia of pump and pressure oil. There are two kinds of solenoid vale --- membrane type and piston type. The former, simple structure and high anti—pollution, is closed through membrane. However, its performance is depended upon the technology about membrane and weather. The latter valve controlled through piston has wide applicable range of temperature, weak to anti-jammed pollution. Double flux solenoid valve is controlled by the position movement of cam that is driven by motor, and large fuel dispenser or small flux is realized through the open or closed of main or vice valv fuel dispenser e. It has merits of wide applicable temperature fuel dispenser range, high pollution-resistant. At present, most manufacturers adopt double flux membrane solenoid valve in fuel dispenser. Double flux solenoid valve Structure and working principle Membrane solenoid valve is widely adopted recently, which also called double flux solenoid valve, shown in Diagram 2-35 and 2-36. Diagram 2-35: Working principle of double flux solenoid valve Diagram 2-36:

technical specification

    carried  out in step 1 have shown that a transaction is impossible   12.4.2.3. Management of authorisation requests   Principles:   the need authorisation is determined either by the monetics server or by the ATM (flow   check).   it is indicated to the other unit by the Reason code for authorisation request information   (D387) in messages 5 and 6   as a last resort based on data item D387 received in message 6 it is always the ATM that   triggers the call for authorisation by transmitting message 7 in which it returns data item   D387   during the wait for the reply from the monetics server (message 8 ) the ATM can abandon   the current transaction by sending message 9 ; the monetics server may or may not issue   message 8 : in any case it will not be processed by the ATM   The following diagram shows the case of a successful authorisation request:   ATM Monetics server   Transaction open 3   Transaction open reply 4   Card validity request 5  flow check - authorisation request   issu fuel dispenser er risk - authorisation request   fuel dispenser Card validity reply 6   fuel dispenser Release of authorisation request   7   Authorisation management  All rights reserved ? Printed on 281004 10:10 6398  

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    l. Elsewhere in the euro area, domestic demand has been the main source of growth in any case. According to Morgan Stanley, since 1999 it has supplied 95% of the zone s GDP growth. These economies are therefore more resistant to external shocks than is generally thought. Although Germany is leading the pack, businesses throughout the euro area are feeling perkier. The European Commission s survey of business sentiment rose healthily in January, to a level that could signal GDP growth of well above the consensus forecast of 2% for this year. Stronger demand will embolden the monetary hawks in the European Central Bank. The bank left interest rates unchanged at 2.25% on February 2nd, but many economists expect it to raise them in March. UBS thinks rates will reach 3% by September. Might that dampen the recovery? Probably not in inflation-adjusted terms, rates would still be low. Alongside stronger domestic demand in Europe and Japan, emerging economies are also tipped to remain robust. These economies are popularly perceived as excessively export-dependent, flooding the world with cheap goods, but doing little to boost demand. Yet calculations by Goldman Sachs show that Brazil, Russia, India and China combined have in recent years contributed more to the world s domestic demand than to its GDP growth. They have chipped in almost as much to global domestic demand as America has. If this picture endures, a moderate slowdown in America need not halt the expansion i fuel dispenser n the rest of the world. Europe and Japan together account for a bigger s fuel dispenser lice of global GDP than the United States, so f fuel dispenser aster growth there will help to keep the global economy flying. A rebalancing of demand away from America to the rest of the world would also help to shrink its huge current- account deficit. This all assumes that America s economy slows, rather than sinks into recession. The world is undoubtedly better placed to cope with a slowdown in the United States than it was a few years ago. That said, in tho