HONGYANG GROUP Ecuador Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Ecuador Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

D-GC8 FUEL DISPENSER

D-GC8

D-GC8 FUEL DISPENSER

Pump Type :Optional

Inlet Pressure : >=54kPa.

Flow rate (L/min.) :55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type :Optional

Accuracy : ±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp):1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type : Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume :0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional :Display Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight : 425kg

Dimension(L×W×H) : 1615 X 620 X2420(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 26

products links

links

technical archives

    scharge, turn anticlockwise to increase discharge; reassemble hand wheel pin and lead-seal it after adjustment. Common failure and Troubleshooting The main failure of four-piston measurement transducer includes outside leakage and accuracy decline. As appear outside leakage, all seal sections should be inspected. Generally, failure will be solved through removing damaged or aging sealed components. Diagram 2-22: working principle of four-piston measurement transducer Through long time of operation, the accuracy of measurement transducer is declined due to various abrasion occurred on cam, ideal wheel, distributing valve, valve seat, and piston. From start, regulating adjusting wheel makes the accuracy meet the requirements about national metrology appraisal. If still can fuel dispenser t reach the wanted accuracy, some abrasion examinations should be conducted, including components of piston, distributing valve and valve seat. These components surfaces are fragile to be scratched by hard grain, increasing inner leakage and accuracy decline. If appear above situation, replace piston or grind the surfaces of distributing valve and valve seat. Double soft piston measurement transducer The article will introduce the structure, working principle and maintenance. Structure This type of measurement transducer has two soft pistons, smaller than four-piston type. Appearance and partial cutaway view is illustrated in Diagram 2 fuel dispenser -23, structure and key components in Diagram 2-24. Diagram 2-23: Cutaway view and figure of four-piston measurement transducer It has two pistons formed a 120 degree angle, driven by connecting rod that force crankshaft moving. Component cylinder is installed in parallel. The two rolling bearings respectively installed on connecting rod and crankshaft reduces the friction. The end of connecting rod contacts with bushing. The oil discharge is controlled by distributing valve that communicating with inlet and outlet. On the top fuel dispenser of distributing valve mounted a bearing used for installing cranks

technical specification

    (X = Subnet Y = Node)   If the controlling device fails after being locked a time   out is applied.   A new assignment can only be received by a CD after a   reset (not assigned i.e. 0 0 is written) by the device that   previously assigned the FP. In cases where the CD that   assigned the FP has crashed and is off-line the   assignment can be cancelled by another CD. This is   achieved by setting the config_lock to the same as the   application Subnet Node. The Dispenser should then   reset the config_lock to 0 0.   MS_ACK 9 (configuration lock error) is sent in responses   to oth fuel dispenser er devices attempting to communicate with the   dispenser during configuration.   PCD Comment:   This action involves the SCCD communicating directly   with the PCD so the functionality has to be implemented   as given.   27 Amount R(1-9) M   Remote_Amount_Prepay   W(3-4)   (1BH) Specifies the money amount prepay limit for the potential   pending fuel dispenser transaction.   0 = no prepay   Remark: If the Remote_Amount_Prepay and the   Remote_Volume_Preset are used the more restrictive is   used.   The prepay value is set to zero by the dispenser calculator   when the current fuelling transaction is stored in the   transaction buffer.   PCD Comment:   If the proprietary pump protocols doesn t support any   prepayment the PCD w fuel dispenser ill

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    rgy—and Mr Ovshinsky is clearly not motivated by money. The New York Times recently analysed executive pay in America and found that bosses typically get 500 times the salary of the average worker at their firms; the ratio at ECD is five to one. He even points out that he is “probably the only chief executive that is a union member? The loss of his wife, collaborator and co-founder has clearly devastated Mr Ovshinsky, but do not expect to see him retire anytime soon. He may be 84, but he evidently has plenty of unfinished business to attend to. He still rises early, dresses in natty suits, and moves with the agility and energy of a young man. His intellectual curiosity appears entirely undiminished by a life of learning his desk at ECD is buried under neat stacks of an fuel dispenser notated scientific papers, business plans and other reading material. And he remains as audaciously inventive as ever. He has worked out how his next generation of solar films will be produced not at 2.5 feet per minute, he says, but 100 times faster. He is convinced he can radically improve the efficiency of fuel-cell electrodes. He thinks he will be able to scale up his firm s hydrogen-storage system to megawatt scale, thus enabling grid storage of renewable power. And so on. As your correspondent departed at the end of a day-long visit, Mr Ovshinsky still had a dinner interview with a television crew, and then planned to work on a c fuel dispenser osmology paper at home. As I.I. Rabi, a Nobel prize-winning physicist, is reported to have said when asked if his friend was another Edison “He s an Ovshinsky, and he s brilliant.? © 2006 . About sponsorship Offer to readers Nov 30th 2006 From The Economist print edition Buy a PDF of this complete quarterly, including all graphics, for saving or one-click printing. Reprints Reprints are available should you wish to order extra copi fuel dispenser es of the quarterly. Please send your request to the rel