HONGYANG GROUP Ecuador Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Ecuador Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly




Pump Type :Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m): 6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V) :110V/220V/380V,50Hz/60Hz

Capacity(hp) 1HP(0.75kw)

Input Voltage :110V/220V/380V,50Hz/60Hz

Nozzle : Auto Shut-off Nozzle

Environmental Condition :-40~~+55degree

Control Type : Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter): Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price : 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range :0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume : 0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer :1~~9,999,999

Hose :4.5m

Weight :405kg

Dimension(L×W×H) :1270 x 620 x 2420(mm)

Dimension(L×W×H)Of Qty of Container : 40ft: 28 20ft: 13

products links


technical archives

    ds of gear pumps. The following introduce cycloidal gear pump: Diagram 2-8: Two kinds of internal gear pumps Gear pump structure Diagram 2-9 is an exploded drawing for inner cycloidal gear pump. Inner cycloidal gear pump mainly composed of frame, gear-group, overflow valve, strainer, pump cover subassembly, etc. pump chamber is cylinder-shape in which strainer is installed at inlet of oil. Overflow valve and pump is in parallel connection. Concentric installation is between pump chamber and exterior gear-group, between inner gear and principal axis. But inner gear and outer gear is assembled centrifugally. Principal axis drives gear-group rotate. Gear pump has two chambers --- pressure oil chamber that disch fuel dispenser arge oil and suction chamber that suck oil—which are not connectable. When gear pump operating gear-group rotate anticlockwise at view of pump cover direction. Delivery pressure depends upon the adjustment of overflow valve, laden degree and inner penetration. In the process of nozzle open, small oil resistance, overflow valve is in low status of openness. However, as nozzle turn down or large oil resistance and pressure, the spring of overflow valve move sideward, increasing openness so that more oil flow into negative chamber. The outlet pressure of pump keeps under 0.3Mpa. Working principle of overflow valve The outlet of overflow valve is the interface in where pressured oil chamber pass into suction chamber. The overflow valve play role as a protection to restrict the highest pressure in hydraulic system and to adjust delivery volume of fuel dispenser. Its structure is illustrated in Diagram 2-9. Motor driving pump starting work, the pressured oil from pressure area flow into vapor-separator and overflow valve outlet via pump outlet. Given switch nozzle, part of oil flow out of pipe of vapor separator, another part of oil flow into suction chamber via overflow valve with small openness. However, as close down nozzle, pressured oil overcome spring bounce under high pr fuel dispenser essure in hydraulic s fuel dispenser

technical specification

    Interfaces Gateway  Visualization   IFSF Field   Service   Tool  15 IFSF Technical Workshop 21 22 January 2004   ? DH electronics GmbH 2004   All rights reserved. Subject to changes.   1234 IFSF Tools and Solutions   PocketPC based IFSF Field Service Tool  16 IFSF fuel dispenser Technical Workshop 21 22 January 2004   ? DH electronics GmbH 2004   All rights reserved. Subject to changes.   What is a PocketPC   based IFSF Field   Service Tool ??? PDA with an Microsoft   operating system and running   our IFSF Field Service Tool   application on it.   A USB Host Interface   is required on the PDA!   + Use our 1236   network interface to   connect the PocketPC via   USB to an IFSF network.  17 IFSF Technical Workshop 21 22 January 2004   ? DH electronics GmbH 2004   All rights reserved. Subject to changes.   Low level testing of IFSF networks   What can I do   fuel dispenser fuel dispenser

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    Berlusconi government might not make up the shortfall. Most local authorities lean to the left. If they have to cut services, would that worry a conservative administration in Rome? Despite Mr Berlusconi s last-minute offerings, the odds are still, just, on a centre-left victory next week. But the margin is likely to be small. That is partly because, in a final effort to keep out the opposition, the government has changed the voting system. Since 1993 three-quarters of the seats in parliament have been elected on a first-past-the-post basis. Italian politics has evolved away from the old set-up, with lots of parties feuding among themselves before forming a kaleidoscope of differing coalitions, towards a new fuel dispenser bipolar system with two broad coalitions of parties on the centre-right and centre-left. All the evidence is that voters welcomed this change, as it gave them a clearer choice at elections. Yet last year the government junked it to move back to full proportional representation (albeit with a threshold for parliamentary seats and a complex top-up formula for the winning side). The new voting system seems likely to produce a smaller majority for the centre-left if it wins, especially in the Senate. Indeed, it is possible that the two chambers could end up in different hands, a recipe for policy paralysis. A close result would make it much harder for Mr Prodi to control his broad coalition, which embraces, on the right, the Margherita Party led by Francesco Rutelli (who lost for the centre-left against Mr Berlusconi in 2001), the reformed ex-communist Democrats of the Left, led by Piero Fassino, and, on the far left, the unreformed Communists, led by Fausto Bertinotti. Should Mr Berlusconi s centre-right coalition bounce back and win, it too is likely to have a wafer-thin majority. The prospect is that any new government, from either side, will be weak and beholden to fractious parties at the extremes. Would that make any difference? Yes, for the challenges f fuel dispenser acing a new government fuel dispenser